505-369-3727

A hot water heater is a hard working appliance. Day or evening, it’s making completely heated water whenever you desire it. So when it all of a sudden is no longer working adequately, many of us often overreact.

The good news is a nonfunctioning water heater does not constantly suggest an expensive repair work. Prior to making an emergency call to Water Heater Repair Albuquerque, we recommend inspecting the issue yourself first.

Albuquerque Water Heater Repair Troubleshooting

Check the Pilot Light

For a gas water heater, eliminate the small panel on the bottom of the system and examine to observe if the pilot light is illuminated.
Spark it with a match or lighter to re-ignite it. If it remains lit, the water heater need to kick-in and begin functioning effectively.
If the pilot burner on the water heater does not remain ignited, you might should change the thermocouple or have the burner cleaned.

Replace the ThermocoupleHot Water Heater Repair Albuquerque

It seems like part of a space ship, however it’s really an easy system that you can change on your water heater.

Refer to the owner’s handbook. It needs to have directions for how you can eliminate and change the thermocouple.
Shut off the gas prior to taking out anything at all from the water heater.
Using the directions in your individual’s handbook, eliminate the thermocouple by removing it from both sides of the aviator line.
Change the thermocouple on the water heater with a brand-new one that is cut to length.
Turn on the gas and check for leakages, then re-light the pilot light.

Hit the Reset Button

If you have an electric water heater, find the reset button and push it till you hear a click.
If you do not hear a click, or it falls short to reboot the water heater, reset the breaker.
If a breaker reset does not do the technique, you might should change the thermostat.

Change the Thermostat

Turn off the power to the water heater, and switch over off the breaker it is linked to. You do not desire to electrocute yourself!
Use the owner’s handbook to find the thermostat wires, then detach them.
Eliminate the thermostat and have it checked by a home appliance dealership. If it is damaged, change it.

Change the Heating Element

With the power still switched over off, eliminate the gain access to panel on the water heater.
Loosen the terminal screws and pull the wires far from the heating element.
Eliminate each element of the element and have them checked by a home appliance repair shop. If they are damaged, change them.

Your water heater need to be going in no time. If these actions fall short to repair your hot water heater, or if you do not feel at ease doing them by yourself, call Hot Water Heater Repair Albuquerque.